|
"DUENDE" an Andalusia term for a mystical
protector of treasure...
Tonal treasure
is the new Bogner DUENDE amp, a giant leap forward in the quest for a
versatile lower wattage Channel switching, Reverb and Tremolo "grab and
go" amp.. The DUENDE is comfortable in either the living room or with
the 15 watts blazing at a sweaty juke-joint jam. A Musical Sherpa that
can artfully carry one from vintage clean tones or sweetly organic edge
of breakup grind to chunky British higher gain. Honeysuckle sweet to
burning Moonshine you decide how to set the two channels or COMBINE both
channels so the Gain, Volume and EQ controls become interactive and an
incredible range of radical gain and EQ options are available such as:
Shimmering American vintage cleans, greasy tweedy thick mids and grind,
forward shifted juicy midrange like vintage lapsteel/harp amps, British
higher gain hotrod tones with focused lows. The DUENDE has a beautiful
dynamic tube Sag and Compression that feels great to play and is really
connected to your picking hands attack. Other features include a tube
buffered Effects Loop and Compensated Recording Output. Both single coil
or humbucker pickups will have a tone feast through the DUENDE as it
breathes effortlessly....
FEATURES:
1x12 Combo
with Celestion G12H30 speaker or head
15 watts from two 6V6 power tubes
5Y3 or 5AR4 tube rectifier
Five 12AX7 preamp tubes
Two channels that can be COMBINED or used separately, footswitchable
Reverb with independent level controls for each channel, Accutronics
Spring large tank
Tremolo Photo-cell with speed and depth controls, footswitchable
Effects Loop tube buffered send/return
Compensated Recording Output
Power-amp Line Output
Extension speaker 8 ohm output
Master EQ section: Treble, Body controls shared with Channel 1 and 2
Channel 1: Gain, Pull bright switch, Treble, Bass, Volume and shared
Master EQ controls
Channel 2: Gain, Pull bright switch, Volume and shared Master EQ
controls
DIMENSIONS and
WEIGHTS: Are subject to change anytime, Please measure your
amp carefully if a Custom Case is being made. All measurements include
handle and rubber feet. Older amps may have a rubber carrying handle on
the top which is 1/4" lower in height. Weights include our shipping box
and packaging.
- Head - 11 1/2" height
x 24 1/2" width x 10 1/2" depth, 30 pounds
- 1x12 Combo -
23" height x 24 1/2" width x 10 1/2" depth, 40 pounds
|
