|
We have
discontinued the Lehle Pedals and Effects line for 2007 |
|
|
|
Lehle
Custom Amp Switchers
Pedal & Effects Loopers
|
|
|
The Lehle 1@3 Amp Switcher Pedal
The Lehle 1@3 can be used
in 1 of 2 modes: Mode 1 enables you to switch between three amps - the
signal is routed (without semiconductors) directly via gold plated
relays to 1 of the 3 outputs: A, B or C. The other 2 outputs are muted.
Mode 2 allows the user to plug their effects chain into the special C-B
input (Output C is muted). In this mode, the effects chain is tied into
amp B as follows: when "B" is depressed, the input signal is routed to
amp B - dry (effects chain bypassed); when "C" is depressed, the input
signal is routed to amp B - wet (effects chain engaged). The Lehle 1@3
can use any power supply between 8 and 20 V with either polarity (AC or
DC). The supply voltage is internally rectified and stabilized in order
to guarantee trouble free operation. High intensity LEDs behind a
magnifying lens makes it easy to read switching state (A, B or C) even
under bright spotlights. All Lehle switchers are totally passive. To the
purist, what this means is that the great tone you bought your
particular tube amp for in the first place will not be compromised.
Active switcher boxes (with their resultant change in impedance from
high to low) cause an amp's crunch/distorted tone to become fuzzy. Lehle
switchers maintain that unique interaction between guitar and amp, as if
there is only a high quality cable in between.
List $239.00
Synergy
Price: $219.99
|
|
|
|
The Lehle Dual Amp Switcher Pedal
The Lehle Dual enables you to switch
between two amps or run your signal to both amps. The signal is routed
directly (without semiconductors) via gold plated relays to Output A or
B or both. A is electrically isolated from B by means of a high end (lundahl)
line splitter; humming loops are impossible, even if A and B are
switched on simultaneously. The Lehle Dual can use any power supply
between 8 and 20 V with either polarity (AC or DC). The supply voltage
is internally rectified and stabilized in order to guarantee trouble
free operation. High intensity LEDs behind a magnifying lens make it
easy to read switching state (A and/or B) even under bright spotlights.
External trim potentiometers make it possible to adjust Output A or B if
both are engaged simultaneously. For example, gain (up to 6 dB) can be
trimmed back so that one amp gets hit harder than the other. All Lehle
switchers are totally passive. To the purist, what this means is that
the great tone you bought your particular tube amp for in the first
place will not be compromised. Active switcher boxes (with their
resultant change in impedance from high to low) cause an amp's
crunch/distorted tone to become fuzzy. Lehle switchers maintain that
unique interaction between guitar and amp, as if there is only a high
quality cable in between.
List $259.00
Synergy
Price: $239.99
|
|
|
The Lehle 3@1 Instrument to Amp
Switcher Pedal
The Lehle 3@1 enables players to plug
in three instruments and route them (A, B or C) to one amp. All three
inputs are routed in stereo to both parallel outputs. One output can be
utilized for a tuner and the other to the amp. The signal is routed
(without semiconductors) directly via gold plated relays to both
outputs. Internal trim potentiometers (for B and C) make it possible to
adjust input levels of various instruments to achieve a balanced level
to the amp. The Lehle 3@1 can use any power supply between 8 and 20 V
with either polarity (AC or DC). The supply voltage is internally
rectified and stabilized in order to guarantee trouble free operation.
High intensity LEDs behind a magnifying lens makes it easy to read
switching state (A, B or C) even under bright spotlights. All Lehle
switchers are totally passive. To the purist, what this means is that
the great tone you bought your particular tube amp for in the first
place will not be compromised. Active switcher boxes (with their
resultant change in impedance from high to low) cause an amp's
crunch/distorted tone to become fuzzy. Lehle switchers maintain that
unique interaction between guitar and amp, as if there is only a high
quality cable in between.
List $239.00
Synergy
Price: $219.99
|
|
|
The Lehle Dual Effects Looper Pedal
In response to numerous requests
from guitarists, Lehle is pleased to announce the introduction of a
fully programmable Dual Effects Looper/Switcher called the "D.Loop". The
unit allows the guitarist to switch in effects loop A, effects loop B,
or both effects loops at the same time (all in stereo). A buffered input
which changes impedance from high to low can also be switched in,
allowing the player to utilize long cable runs or clean effects with
maximum effectiveness. In addition, the D.Loop is MIDI capable. The
Lehle D.Loop can use any power supply between 8 and 20 V with either
polarity (AC or DC). The supply voltage is internally rectified and
stabilized in order to guarantee trouble free operation. High intensity
LEDs behind a magnifying lens makes it easy to read switching state
(Buffer, Loop A, Loop B) even under bright spotlights. All Lehle
switchers are totally passive. To the purist, what this means is that
the great tone you bought your particular tube amp for in the first
place will not be compromised. Active switcher boxes (with their
resultant change in impedance from high to low) cause an amp's
crunch/distorted tone to become fuzzy. Lehle switchers maintain that
unique interaction between guitar and amp, as if there is only a high
quality cable in between.
List $270.00
Synergy
Price: $249.99
|
|
|
|
|
|